polymaker
PolyDissolve S1 (1.75mm/0.75kg)
PolyDissolve S1 (1.75mm/0.75kg)
Couldn't load pickup availability
PolyDissolve™ S1 is a PVA based water dissolvable support for PLA, TPU, PVB and Nylon based filaments from our portfolio. It is specifically engineered to have a perfect interface with these materials while also displaying good solubility.
PolyDissolve™ S1 can support PLA, PVB, TPU and Nylon based materials from our portfolio.
Printing Temperature: 215˚C - 225˚C
Bed Temperature: 25˚C - 60˚C
Printing Speed: 30mm/s - 40mm/s
Fan: ON
Direct Drive:
Retraction Distance: 1mm
Retraction Speed: 20mm/s
Indirect Drive:
Retraction Distance: 3mm
Retraction Speed: 40mm/s
Drying Settings: 80˚C for 12h
(Only if the material has absorbed moisture)
PolyDissolve™ S1 is very hygroscopic, please make sure to use a dry box.
It can take 6-12hours to fully dissolve depending on your setup.
You can speed up the process:
- By increasing the water temperature
- By changing the water regularly
- By adding a pump to make the water flowing
-
Shipping
Free shipping on all orders over $100 (Continental USA ONLY)
The 3d MakerPlace
We aim to be your one stop shop for all your 3D printing needs. If you can't find what you are looking for or have questions about any of our products Email us!